3. Crevice corrosion

Crevice corrosion occurs in confined spaces where stagnant solutions can become trapped, such as under gaskets, washers, or fasteners. Factors influencing crevice corrosion include:

Oxygen depletion: limited oxygen in the crevice compared to the surrounding area can lead to differential aeration, causing localised corrosion.
Acidic conditions: accumulation of acidic by-products within the crevice.
Concentration of corrosive species: higher concentration of chlorides or other aggressive ions within the crevice.

Prevention measures

Designing joints and assemblies to avoid crevices by avoiding very sharp corners.
Sealing joints to prevent the ingression of corrosiand ve solutions.
Using corrosion-resistant materials.

4. Pitting corrosion

Pitting corrosion is a localised form of corrosion that forms small holes or pits in the metal. It is particularly insidious because it can cause rapid penetration of the metal while the overall corrosion rate may appear low. Influencing factors include:

Presence of chloride ions: chlorides are highly aggressive and can disrupt the passive film on metals, leading to pitting.
Metal composition: certain alloying elements such as Mo, N, and Cr can increase resistance to pitting.
Environmental conditions: temperature, PH, and other factors can influence pitting propensity.

Prevention measures

Using high-alloy steels with good pitting resistance, such as stainless steel with higher chromium and molybdenum content.
Maintaining clean surfaces and avoiding stagnant conditions.
Applying protective coatings and cathodic protection such as galvanised or galvalume coatings.

Methods to enhance corrosion resistance

To protect steel structures from corrosion, especially during the rainy season, several methods can be employed:

Protective coatings

Paints and epoxy coatings: applying a layer of paint or epoxy resin creates a barrier that prevents moisture and oxygen from reaching the steel surface.

Galvanisation: this process involves coating steel with a layer of zinc, which acts as a sacrificial anode, corroding in place of the steel.

Corrosion inhibitors

Chemical compounds can be added to the environment surrounding the steel, reducing the corrosion rate. These inhibitors can be mixed with concrete or applied as a spray.

How corrosion inhibitors work

Corrosion inhibitors interact with the metal surface to form a protective film. There are three types of these films:

Passivating film: these are thin, oxide films (30–200 å thick) that provide excellent protection. Examples include chromates and nitrites, though they are less used today due to toxicity concerns, except in critical areas like aerospace and construction. Other examples like tungstates and molybdates work in the presence of air.

Precipitation film: these inhibitors react with soluble species in the environment or with the metal to form a protective layer. For example, phosphonates and polyphosphates form films with calcium ions, while copper-benzotriazole forms a film with copper ions. These films might be porous and not perfectly adherent, but still offer decent protection.

Adsorption film: these inhibitors are usually organic molecules that attach to the metal surface. They have a part that bonds with the metal and a part that sticks out into the solution, reducing the metal's contact with oxygen and water, thus slowing down corrosion.

Proper design and maintenance

Ensuring that steel structures are designed with proper drainage and ventilation can minimise water retention and reduce the risk of corrosion. Regular maintenance, such as inspecting and repairing protective coatings, is also essential. Cleaning and disposal of corrosion products, if any by some mechanical or chemical means can also minimize further corrosion.

Role of structural steel fabricators

Structural steel fabricators play a crucial role in the construction process, from designing and creating steel components to implementing corrosion protection measures. Experienced fabricators understand the importance of selecting suitable materials and protective methods to ensure the durability and safety of steel structures, especially in environments.

Conclusion

Corrosion resistance in structural steel is critical for any construction project, particularly during the rainy season. By understanding the various methods and materials available to protect steel from corrosion and collaborating with skilled structural steel fabricators, you can ensure the longevity and integrity of your steel structure building.

Industrial buildings

What is the role played by concrete admixtures in modern construction?

What is slab, beam, column, and footing construction?

Strategies and materials for rainy season corrosion in structural steel

5 applications of welded wire mesh

Steel vs concrete support structures for solar panel installations

Why are soil analysis and site preparation for installing steel support important in solar panels?

Top techniques for welding TMT bars

Types of cement and their uses in construction projects

5 advantages of galvanised steel support posts in solar projects