Mild Steel
Stainless Steel
Structural Steel
TMT
Cement
Bitumen
Blogs
No product found
Your search did not find any products. Please call us on 7208055523 or
email your enquiry at support@jswonemsme.com

Standard Packed Bitumen IS 8887:2018 MS

Brand Standard

Standard Packed Bitumen IS 8887:2018 MS

Brand Standard
Overview
Product information
  • Sourced from India's most trusted suppliers, adheres to BIS specifications and meets IS 8887:2018 parameters 
  • Material Test Certificates (MTCs) from NABL certified labs 
  • Suitable for medium-setting applications in road construction and maintenance 
Applications: Slurry seal, micro-surfacing, cold mix asphalt, and patch repairs 
Item details
Product name
Standard MS Packed Bituminous Emulsion
Supply condition
Liquid form, Stored and transported at ambient temperature, Embossed
Packaging
Bitumen material loaded in Sealed drums
Overview
Physical properties
Physical properties
Residue on 600 micron; IS Sieve | as per IS 8887:2018 Annex B
Max 0.05 % by mass
Viscosity by saybolt furol viscometer at 25°C| as per IS 3117

Viscosity by saybolt furol viscometer at 50°C| as per IS 3117
50-300 seconds
Coagulation of Emulsion at low temperature 1) | as per IS 8887-2018, Annex C
Nil
Storage stability after 24 h | as per IS 8887-2018, Annex D
Max. 1%
Particle Charge | as per IS 8887-2018, Annex E
Positive
Coating ability and water resistance, dry aggregate | as per IS 8887-2018, Annex F
Good
Coating ability and water resistance, after spraying | as per IS 8887-2018, Annex F
Fair
Coating ability and water resistance, wet aggregate | as per IS 8887-2018, Annex F
Fair
Coating ability and water resistance, after spraying | as per IS 8887-2018, Annex F
Fair
Storage stability mixing with Cement | as per IS 8887 -2018, Annex G

Miscibility with water | as per IS 8887-2018, Annex H
No Coagulation
Residue on evaporation | as per IS 8887-2018, Annex J
65
Penetration 25 °C. 100g; 5 sec dmm | as per IS 1203
60-150
Ductility 27 °C/cm | as per IS 1208
50
Solubility, 1 tricholoethylene | as per IS 1216
Min 98% by Mass
Distillation in % volume of distillate recovered at 190 °C | as per IS 1213

Distillation in % volume of distillate recovered at 225 °C | as per IS 1213

Distillation in % volume of distillate recovered at 260 °C | as per IS 1213

Distillation in % volume of distillate recovered at 316 °C | as per IS 1213

Distillation in % volume of distillate recovered | Residue at 360 °C | as per IS 1213

Water content, % by mass, Max | as per IS 1211

Configure your requirement
Share your requirements
Order from
Select product dimensions and enter required quantity before requesting price
Configure your requirement
Share your requirements
Order from
Select product dimensions and enter required quantity before requesting price
Price details
Price details
Add to cart
Buy now